Zamp Roof Combiner Box (C-Box)
Zamp Roof Combiner Box (C-Box)
For small to medium-sized solar-charging systems:
UV resistant, low profile, will accommodate a number of connection styles*
5 1/4" W x 4 5/8" D x 1 7/8" H
Up to 6GA output cable
Up to 4 inputs
2 ATP input plugs
2 knockouts for 1/2" weathertight fittings
For Zamp Legacy SAE connections, use Zamp Compatible SAE Plug & Strain relief for C-Box
Educational Resources
You may also be interested in:
A step bit or hole saw is often useful when makeing holes to routing wires for various RV power projects. These step bits will make a clean hole in thin metal, plastic or wood. A step bit or hole saw is required to drill the output hole in the base of the Zamp C-Box and is also recommended when using the additional "knockouts" on the sides of that box.
These step bits are in a 2 pack (3/16"-7/8" & 1/4"-1-3/8").
This part enables a liquid tight seal for our 6ga through 4ga cable exiting a combiner box when not using a roof penetration. Cable Range of .170"-.450"
3M VHB tape is used to secure mounting feet and combiner boxes to fiberglass or metal roofs (not rubber). Cut each 5" strip in half for each of four mounting feet per panel.
Custom designed for AM Solar with a UV resistant jacket and a round profile that creates a tight seal through a liquid tight strain relief, this cable goes from solar panels to the combiner box.
Sold by the foot
This part enables a liquid tight seal for our custom 10/2 roof cable entering a combiner box or a single conductor exiting a combiner box. Can also be used for 2ga output cables. Cable Range of .230"-.546"
Ideal for Airstream roofs, Teroson protects the VHB tape from the elements and is UV rated. Use it to seal around mount feet, cable management hardware, and combiner boxes attached to roofs. Do not use Teroson on TPO roofs.
This kit allows Zamp panels to connect to the AM Solar combiner box. Updated design has more weatherproofing.
This part enables a liquid tight seal for the positive and negative leads of 10ga. PV wire entering our combiner box from the solar panel. The weather tight gland has 2 holes which will accommodate wire from .25-.27" in diameter.
This C-box is for efficiently combining solar panel output cables and sealing off a roof penetration. Its rugged and spacious design make installation and troubleshooting very easy. Do not use VHB tape on rubber (EPDM or TPO) roof material, all other roof types should use the taped option.
Dimensions: H 1.9" x W 11.61" x D 5.87"
This kit allows Zamp panels with ATP connectors to splice onto 10ga cable.
PLUG-2PORTCMBNR-ATP