Victron Lithium Expansion Kit
Victron Lithium Expansion Kit
Add a Victron Lithium battery to an existing Victron lithium system. Do not mix battery ratings in the same system. Parallel Expansion kits are for 12V battery systems. 24V battery systems can be built from an equal number of Parallel and Series Expansion kits.
Please see note about shipping Victron batteries below.
The delivery of Victron batteries is more complicated than that of our other products. They must be drop-shipped from Victron, and Victron requires that shipments go to a commercial address that has either a forklift or a loading dock (one or the other is fine). If we have a registered AM Solar dealer or installer near you, we can usually ship to them with no issues. If we don't, we would need you to find a suitable commercial shipping address in your area as per the requirements above. Many such businesses are wary of liability issues with lithium shipments, so you may need to try a number of options.
Some examples would be your workplace, the workplace of a friend or family member, or a neighboring business that is open to receiving a lithium shipment on your behalf.
This is just a battery expansion kit. It will not function by itself. It can only be used in conjunction with the AMS Essential or Signature lithium battery systems. Do not mix batteries of different capacities.
Battery Specifications:
100Ah - H 7.76" W 12.64" x D 6.0", 30lbs
Charge Current: 200Ah, Discharge Current: 200Ah
200Ah - H 9.33" W 12.64" x D 6.0", 44lbs
Charge Current: 400Ah, Discharge Current: 400Ah
330Ah - H 10.44" W 14.14" x D 8.11", 66lbs
Charge Current: 400Ah, Discharge Current: 400Ah
What you get:
Base Kit (Parallel Cables)
6' CABLE-2/0-1-BLK Cable 2/0
4x LUG-2/0-RING-3/8 2/0 Lug-3/8" Ring
2x 93H-B3/4 Heat Shrink Black 1.5" x 3/4"
2x 93H-R3/4 Heat Shrink Red 1.5" x 3/4"
Battery Options
1x BATTLI-VT-100 BAT512110610 LiFePO4 Battery 12,8V/100Ah Smart
1x BATTLI-VT-200S BAT512120610 VE LiFePO4 Smart Batt 12.8V/200Ah
1x BATTLI-VT-300 BAT512130410 LiFePO4 Battery 12,8V/300Ah Smart
You may also be interested in:
A modular DC bus bar, with locations for four DC fuses. It will monitor the status of each fuse, and indicate its condition with a LED on the front. Part of the modular Lynx distribution system. Fuses sold separately.
Dimensions: H 3.0" x W 11.3" x D 6.9"
These Mega Fuses are commonly used inside the Victron Lynx Distributor in lithium battery systems, or in any another high DC over-current protection scenarios.
Recommended Installation Tools:
AM Solar Part Number: 94Vs-100, 94Vs-200, 94Vs-300
All lithium battery purchases are final.