Zamp Obsidian Mounts
Zamp Obsidian Mounts
For use with Zamp Obsidian 90W and 100W solar panels.
Low profile mounts are ideal for Zamp Obsidian 90W panels, as well as for mounting 90W and 100W panels on vans and RVs with flat roofs.
Stabilized mounts are only for Zamp Obsidian 100W panels and are ideal for mounting these panels on curved roofs like Airstreams.
AM Solar Rocker Foot Mount Sets are the culmination of decades of RV solar installation experience. No penetration is needed when installed on fiberglass or metal roofs thanks to the VHB tape. When installing on rubber, TPO or any rough surface, the included mounting screws are recommended. AM Solar was founded in 2002 and has performed thousands of RV solar installations without having a single panel detach from a roof.
This mount set includes hardware designed specifically to work with Zamp Solar Obsidian panel frames.
Written Mounting Hardware Instructions
Roof Mounting Instructions:
1. Clean the surface you are mounting on with 91% isopropyl alcohol.
2. Set the panel with mounts on the roof and position it while the mounts are semi-loose. This will let everything settle into a natural tension-free position.
3. Go around and tighten each bolt gradually, being careful to keep the L-Foot in the same position.
4. Lift the panel and peel the tape cover off of each mount foot.
5. Place the sticky panel back on the roof in the same exact position.
6. Check that each foot is flat against the roof, loosen bolts to make adjustments if necessary.
7. Apply the sealant by completely burying the mount foot.
What you get (Low Profile):
4x MOUNTA-S-OBSN Mount Adapter-Obsidian Short
4x MOUNTL-S3B L Foot-Short 3 Hole Blk
12x FSTBLT-1412SS 25C50HCSS Bolt-Hex 1/4-20x1/2 SS
8x FSNUT-ZMP-SPRING SPM6001 Spring Nut for Zamp Omni Frame
12x FSWASH-SPL-1/4 25NLOCS Washer-Split 1/4" SS
12x FSWASH-FLT-5/16 25NWS Flat Washer 5/8 OD- .281 ID SS
8x FSTSCW-1034SS 10N75PPTS Screw-#10x3/4" PHP SMS SS
10" TAPE-VHB 14088 3M VHB Tape-4950
Mount Dimensions:
Extension Beyond Panel Edge (per side)
Low Profile
91M-OL
2-1/2” Total added to the short side
Stabilized
91M-OS
1-1/2” Total added to the short side
2-1/2” Total added to the long side
Elevation Above Surface
Low Profile
91M-OL
1-3/8”, 1-3/4”, 2-1/8”
Stabilized
91M-OS
1-1/2”, 1-7/8”, 2-1/4”
You may also be interested in:
What you get (Stabilized):
2x MOUNTA-L-OBSN Mount Adapter-Obsidian Long
4x MOUNTL-S3B L Foot-Short 3 Hole Blk
12x FSTBLT-1412SS 25C50HCSS Bolt-Hex 1/4-20x1/2 SS
8x FSNUT-ZMP-SPRING SPM6001 Spring Nut for Zamp Omni Frame
12x FSWASH-SPL-1/4 25NLOCS Washer-Split 1/4" SS
12x FSWASH-FLT-5/16 25NWS Flat Washer 5/8 OD- .281 ID SS
8x FSTSCW-1034SS 10N75PPTS Screw-#10x3/4" PHP SMS SS
10" TAPE-VHB 14088 3M VHB Tape-4950
Educational Resources
Dicor protects the VHB tape from the elements. Use it to seal around mount feet, cable management hardware and combiner boxes attached to roofs.
Ideal for Airstream roofs, Teroson protects the VHB tape from the elements and is UV rated. Use it to seal around mount feet, cable management hardware, and combiner boxes attached to roofs. Do not use Teroson on TPO roofs.
AM Solar Part Number: 91M-OL, 91M-OS