"Z" Bigfoot Mount Set for Zamp Panels
"Z" Bigfoot Mount Set for Zamp Panels
This mount set is designed for use with our AMS Essential kits or Zamp Solar panels. This mount set will not allow tilting. Made of corrosion resistant stainless steel.
Mounting Instructions:
1. Clean the surface you are mounting on with 91% isopropyl alcohol.
2. Set the panel with mounts on the roof and position.
3. Lift the panel and peel the tape cover off of each mount foot.
4. Place the sticky panel back on the roof in the same exact position.
5. Check that each foot is flat against the roof, loosen knobs to make adjustments if necessary.
6. Apply the sealant by completely burying the mount foot.
What you get:
4x MOUNTZ-BF Z-Bigfoot Mount
1x FSTSET-ZAMP Mnt Hardware for Zamp Panels, set of 4
4x FSWASH-FLT-5/16 Flat Washer 5/8 OD-5/16 ID S
8x FSTSCW-1034SS Screw-#10x3/4" PHP SMS SS
10" TAPE-VHB 3M VHB Tape-4950
Mount Dimensions:
Extension Beyond Panel Edge (per side)
Rocker Mounts
91M-35MA
1-1/4”
”Z” Bigfoot Mount Set
91M-35MA
0”, 1-1/8”
Elevation Above Surface
Rocker Mounts
L Foot - 3 Hole (Standard)
MOUNTTL-3
1-1/8”, 1-1/2”, 1-7/8”
L Foot - 5 Hole
MOUNTTL-5
1-1/8”, 1-1/2”, 1-7/8”, 2-1/4”, 2-5/8”
L Foot - Tall 3 Hole
MOUNTTL-T3
3”, 3-3/8”, 3-3/4”
”Z” Bigfoot Mount Set
91M-35MA
1-1/2”
You may also be interested in:
Dicor protects the VHB tape from the elements. Use it to seal around mount feet, cable management hardware and combiner boxes attached to roofs.
Ideal for Airstream roofs, Teroson protects the VHB tape from the elements and is UV rated. Use it to seal around mount feet, cable management hardware, and combiner boxes attached to roofs. Do not use Teroson on TPO roofs.
AM Solar Part Number: 91M-ZBZ