Zamp 115W Solar Panel

SOLAR-ZS115.png
SOLAR-ZS115.png
sold out

Zamp 115W Solar Panel

from $420.00

Designed for narrow spaces using 6" cells, this panel is ideal for small systems. Made in Bend, Oregon, United States.

Wattage: 115W
Type: Monocrystalline
Operating Voltage (Vmp): 18.0V
Open Circuit Voltage (Voc): 23.8V
Operating Current (Imp): 6.3A
Short Circuit Current (Isc): 6.8A
Size: 39.6" x 26.6" x 1.38" 17.6lbs
Frame: Silver Anodized Aluminum

Kit Type:
Add To Cart


Zamp uses tempered, low iron, 3.2 mm, AR coated(which stands for anti-reflective) solar glass.


The benefits include:
1. Increased efficiency of the solar panel by 3-5% compared to non-AR coated glass
2. Converts more light into energy at steeper sun angles producing more power in mornings and evenings
3. Easier cleaning as dust and dirt are repelled by this coating rather than trapped with traditional solar glass

The 3.2mm AR coated solar glass is specially designed for the encapsulation material of photovoltaic modules. The coating reduces the directional reflectance and increases the internal reflection so that the solar energy can be absorbed more effectively. It ensures the maximum transmittance of photons to the solar cells, thus increasing the electrical generation capabilities of the module. The glass offers high solar transmittance, low absorbance, low reflectance, superior physical strength and superior flatness.


The Zamp Solar 115W panel comes in several kit variants.  Select the correct kit to interface with your combiner box.
115W Raw SAE – This is a solar panel with factory-installed SAE cable and no mounts.

115W Mounts 10/2 - (Parallel Add-on) - This is a solar panel with AM Solar 35mm Rocker Mounts, and a 15’ 10ga duplex wire harness spliced to the factor cable on one end and a strain relief on the other, along with roof attachment points.  This kit is designed to interface with an AM Solar combiner box.

115W Mounts 10/2 - (Series Add-on) - This is a solar panel with AM Solar 35mm Rocker Mounts, and a 10’ 10ga duplex wire harness spliced to the factory cable on one end and spliced in series to a 115W panel kit on the other.  This kit is designed to series connect with a 115W Mounts 10/2 Cable panel kit.

115W Mounts 10/2 ATP - This is a solar panel with AM Solar 35mm Rocker Mounts, and a 15’ 10ga duplex wire harness spliced to the factory cable on one end and an ATP connector on the other, along with roof attachment points.  This kit is designed to interface with a Zamp Solar ATP-style combiner box.

Manufacturer’s Certificate

What you get:


115W Raw SAE

1x SOLAR-ZS115 Solar Panel Z115


115W Mounts 10/2 - Parallel Add-on

1x SOLAR-ZS115 Solar Panel Z115
15' CABLE-10GA-2-GRY Duplex-10/2
6" HS-BLK-DWALL-3/4 Heat Shrink 3/4" Black
2x SPLICE-10-BUTT-HS 10-12 ga. Butt HS
1" TAPE-VHB 3M VHB Tape-4950
1x WIRETIE-05 Wire Tie 5-7/8"
1x WIRETIE-BASE Wire Tie Base
5x FSTSCW-1034SS Screw-#10x3/4" PHP SMS SS
1x STRN-1/2LN Liquid Tight Strain Relief 1/2" w/Locknut
5" TAPE-VHB 3M VHB Tape-4950
5x WIRETIE-05 Wire Tie 5-7/8"
5x WIRETIE-BASE Wire Tie Base
5x WIRETIE-SCEYE Wire Tie Screw Eye
4x MOUNTA-35 Mount Adapter-35mm
4x MOUNTL-3 L Foot-3 Hole
8x FSWASH-SPL-1/4 Washer-Split 1/4" SS
4x FSWASH-FLT-5/16 Flat Washer 5/8 OD- .281 ID SS
4x FSNUT-ZMP-SPRING Spring Nut for Zamp Omni Frame
8x FSTBLT-1412SS Bolt-Hex 1/4-20x1/2 SS
8x FSTSCW-1034SS Screw-#10x3/4" PHP SMS SS
10" TAPE-VHB 3M VHB Tape-4950


115W Mounts 10/2 - Series Add-on

1x SOLAR-ZS115 Solar Panel Z115
10' CABLE-10GA-2-GRY Duplex-10/2
12" HS-BLK-DWALL-3/4 Heat Shrink 3/4" Black
4x SPLICE-10-BUTT-HS 10-12 ga. Butt HS
2" TAPE-VHB 3M VHB Tape-4950
2x WIRETIE-05 Wire Tie 5-7/8"
2x WIRETIE-BASE Wire Tie Base
4x MOUNTA-35 Mount Adapter-35mm
4x MOUNTL-3 L Foot-3 Hole
8x FSWASH-SPL-1/4 Washer-Split 1/4" SS
4x FSWASH-FLT-5/16 Flat Washer 5/8 OD- .281 ID SS
4x FSNUT-ZMP-SPRING Spring Nut for Zamp Omni Frame
8x FSTBLT-1412SS Bolt-Hex 1/4-20x1/2 SS
8x FSTSCW-1034SS Screw-#10x3/4" PHP SMS SS
10" TAPE-VHB 3M VHB Tape-4950


115W Mounts 10/2 ATP

1x SOLAR-ZS115 Solar Panel Z115
15' CABLE-10GA-2-GRY Duplex-10/2
6" HS-BLK-DWALL-3/4 Heat Shrink 3/4" Black
2x SPLICE-10-BUTT-HS 10-12 ga. Butt HS
1" TAPE-VHB 3M VHB Tape-4950
1x WIRETIE-05 Wire Tie 5-7/8"
1x WIRETIE-BASE Wire Tie Base
5x FSTSCW-1034SS Screw-#10x3/4" PHP SMS SS
1x PLUG-ATP-M Male ATP Pigtail, Raw
2x SPLICE-10-BUTT-HS 10-12 ga. Butt HS
6" HS-BLK-DWALL-3/4 Heat Shrink 3/4" Black
5" TAPE-VHB 3M VHB Tape-4950
5x WIRETIE-05 Wire Tie 5-7/8"
5x WIRETIE-BASE Wire Tie Base
5x WIRETIE-SCEYE Wire Tie Screw Eye
4x MOUNTA-35 Mount Adapter-35mm
4x MOUNTL-3 L Foot-3 Hole
8x FSTBLT-1412SS Bolt-Hex 1/4-20x1/2 SS
4x FSNUT-NYL-1420 Nut-Nylock 1/4-20 SS
8x FSWASH-SPL-1/4 Washer-Split 1/4" SS
8x FSTSCW-1034SS Screw-#10x3/4" PHP SMS SS
10" TAPE-VHB 3M VHB Tape-4950

Optional add-Ons:

TEROSON MS 5510 Sealant
$18.00
Dicor Sealant
$12.00
Tilt Bar Set - 15.5" / 45°
$45.00
Roof C-Box
from $100.00

AM Solar Part Number:  SOLAR-ZS115, 11-102-ZS115, 11-102-ZS115S, 11-102-ZS115ATP