Zamp Obsidian 90W L Solar Panel

SOLAR-ZSOB90L.png
SOLAR-ZSOB90L.png

Zamp Obsidian 90W L Solar Panel

from $400.00

This panel has it all, a low-profile, a narrow footprint, and high output. It is ideal for van conversions, Airstreams, or anyone wanting the latest in mobile solar panel technology. Custom-engineered by Zamp Solar and made in Bend, Oregon.

Wattage: 90W
Type: Monocrystalline
Operating Voltage (Vmp): 18.0V
Open Circuit Voltage (Voc): 23.8V
Operating Current (Imp): 5.0A
Short Circuit Current (Isc): 5.2A
Size: 59.2" x 14.4" x 0.67" 10.3lbs
Frame: Obsidian Black Anodized Aluminum

Kit Type:
Quantity:
Add To Cart

Zamp Solar - Manufactured in Bend Oregon

Narrow Footprint:
Perfect for Airstream trailers and van rooftop racks, Zamp’s OBSIDIAN® SERIES 90-Watt long panel works with any type of 12-Volt battery. As thin as a flexible panel and lighter weight than a traditional panel without compromising efficiency, this American-made panel also features an ultra-aerodynamic profile and a sleek black anodized aluminum frame.

Accurate Ratings:
Zamp is very conservative in their panel ratings. They would rather have an underrated panel than a disappointed customer. When Zamp says the panel is rated at 100W, it will probably flash test closer to 107W. Because of the higher Vmpp and AR coated glass, this panel will deliver more amp-hours per day than a competitor’s 100W panel.

Manufacturer’s Certificate

The Zamp Solar Obsidian 90W Long panel comes in several kit variants. Select the correct kit to interface with your combiner box.

90W O Raw ATP – This is a solar panel with factory-installed ATP cable and no mounts.

90W OL Mounts 10/2 Cable (Parallel Add-on)- This is a solar panel with AM Solar Obsidian Low Profile Mounts, and a 15’ 10ga duplex wire harness with an ATP adapter on one end and a strain relief on the other, along with roof attachment points. This kit is designed to interface with an AM Solar combiner box.

90W OL Mounts 10/2 Cable (Series Add-on) - This is a solar panel with AM Solar Obsidian Low Profile Mounts, and a 10’ 10ga duplex wire harness that splices into the 10/2 of another panel, along with roof attachment points. This kit is designed to series connect with a 90W OL Mounts 10/2 Cable panel kit.

 

What you get:

90W O Raw ATP
1x SOLAR-ZSOB90L Solar Panel, Obsidian 90W Long


90W OL Mounts 10/2 Cable (Parallel Add-on)

1x SOLAR-ZSOB90L Solar Panel, Obsidian 90W Long
15’ CABLE-10GA-2-GRY Duplex-10/2
6” HS-BLK-DWALL-3/4 Heat Shrink 3/4" Black
2x SPLICE-10-BUTT-HS 10-12 ga. Butt HS
0.25” HS-RED-DWALL-3/16 Heat Shrink 3/16" Red
1x PLUG-ATP-F Female ATP Pigtail, Raw
5x FSTSCW-1034SS Screw-#10x3/4" PHP SMS SS
1x STRN-1/2LN Liquid Tight Strain Relief 1/2" w/Locknut
5” TAPE-VHB 3M VHB Tape-4950
5x WIRETIE-05 Wire Tie 5-7/8"
5x WIRETIE-BASE Wire Tie Base
5x WIRETIE-SCEYE Wire Tie Screw Eye
4x MOUNTA-S-OBSN Mount Adapter-Obsidian Short
4x MOUNTL-S3B L Foot-Short 3 Hole Blk
12x FSTBLT-1412SS Bolt-Hex 1/4-20x1/2 SS
8x FSNUT-ZMP-SPRING Spring Nut for Zamp Omni Frame
12x FSWASH-SPL-1/4 Washer-Split 1/4" SS
12x FSWASH-FLT-5/16 Flat Washer 5/8 OD- .281 ID SS
8x FSTSCW-1034SS Screw-#10x3/4" PHP SMS SS
10” TAPE-VHB 3M VHB Tape-4950


90W OL Mounts 10/2 Cable (Series Add-on)
1x SOLAR-ZSOB90L Solar Panel, Obsidian 90W Long
10’ CABLE-10GA-2-GRY Duplex-10/2
6" HS-BLK-DWALL-3/4 Heat Shrink 3/4" Black
2x SPLICE-10-BUTT-HS 10-12 ga. Butt HS
0.25" HS-RED-DWALL-3/16 Heat Shrink 3/16" Red
1x PLUG-ATP-F Female ATP Pigtail, Raw
2x SPLICE-10-BUTT-HS 10-12 ga. Butt HS
6" HS-BLK-DWALL-3/4 Heat Shrink 3/4" Black
1" TAPE-VHB 3M VHB Tape-4950
1x WIRETIE-05 Wire Tie 5-7/8"
1x WIRETIE-BASE Wire Tie Base
4x MOUNTA-S-OBSN Mount Adapter-Obsidian Short
4x MOUNTL-S3B L Foot-Short 3 Hole Blk
12x FSTBLT-1412SS Bolt-Hex 1/4-20x1/2 SS
8x FSNUT-ZMP-SPRING Spring Nut for Zamp Omni Frame
12x FSWASH-SPL-1/4 Washer-Split 1/4" SS
12x FSWASH-FLT-5/16 Flat Washer 5/8 OD- .281 ID SS
8x FSTSCW-1034SS Screw-#10x3/4" PHP SMS SS
10” TAPE-VHB 3M VHB Tape-4950

 

Optional add-ons:

TEROSON MS 5510 Sealant
$18.00
Tilt Bar Set - 15.5" / 45°
$45.00

For tilting panels approximately 19-25” wide at roughly a 45-degree angle to increase output in the winter months. Made from corrosion-resistant stainless steel. Not recommended for the 90W Long panel.

This item includes 2pc T-Knobs for install. For Extra T-Knobs please see our listing here.

Zamp ATP Prep Kit - Female
$15.00

This kit allows Zamp panels with ATP connectors to splice onto 10ga cable.

Roof C-Box
from $100.00

AM Solar Part Number:  SOLAR-ZSOB90L, 11-102-ZSOL90L, 11-102-ZSOL90LS