Mount Adapter Set
Mount Adapter Set
Attaches to solar modules with 35mm (1.38”) or 40mm (1.57”) thick frames. Extends 1-1/4” Beyond the frame of the short edge of the solar panel. Designed to be used in conjunction with L-feet. Compatible with tilt bars. Made from corrosion-resistant stainless steel.
What you get:
4x 35mm Mount Adapters
4x M6x10mm SS Hex Bolts
4x M601.0 SS Nylock Nuts
4x 1/4" SS Split Washers
You may also be interested in:
Elevates solar panels 1-1/8”, 1-1/2” or 1-7/8” above roof surface. Solar panels require at least four L feet. L feet can be used two to a corner to double surface contact area and improve mount strength. Made from corrosion-resistant stainless steel. The base of the L feet is 2.5” x 1”.
Elevates solar modules 1-1/8”, 1-1/2”, 1-7/8, 2-1/4”, or 2-5/8” above roof surface. Solar panels require at least four L feet. L feet can be used two to a corner to double surface contact area and improve mount strength. Made from corrosion-resistant stainless steel. The base of the L feet is 2.5” x 1”.
Elevates solar panels 3”, 3-3/8” or 3-3/4” above roof surface. Solar panels require at least four L feet. L feet can be used two to a corner to double surface contact area and improve mount strength. Made from corrosion-resistant stainless steel. The base of the L feet is 2.5” x 1”.
For tilting panels approximately 19-25” wide at roughly a 45-degree angle to increase output in the winter months. Made from corrosion-resistant stainless steel. Not recommended for the 90W Long panel.
This item includes 2pc T-Knobs for install. For Extra T-Knobs please see our listing here.
For tilting the ZS170 solar panel at a 45 degree angle for increased output in the winter months. Made from corrosion resistant stainless steel.
This item includes 2pc T-Knobs for install. For Extra T-Knobs please see our listing here.
AM Solar Part Number: 91M-35MA