L Foot - Tall 3 Hole
L Foot - Tall 3 Hole
Elevates solar panels 3”, 3-3/8” or 3-3/4” above roof surface. Solar panels require at least four L feet. L feet can be used two to a corner to double surface contact area and improve mount strength. Made from corrosion-resistant stainless steel. The base of the L feet is 2.5” x 1”.
What you get:
1x L Foot-Tall 3 Hole
2.5" 3M VHB Tape (attached)
Mounting Instructions:
1. Clean the surface you are mounting on with 91% isopropyl alcohol.
2. Set the panel with mounts on the roof and position it while the mounts are semi-loose. This will let everything settle into a natural tension-free position.
3. Go around and tighten each Bolt gradually, being careful to keep the L-Foot in the same position.
4. Lift the panel and peel the tape cover off of each mount foot.
5. Place the sticky panel back on the roof in the same exact position.
6. Check that each foot is flat against the roof, loosen knobs to make adjustments if necessary.
7. Apply the sealant by completely burying the mount foot.
8. If you have T-Knobs, it is best to check that they are tight before going on a trip.
Attaches to solar modules with 35mm (1.38”) or 40mm (1.57”) thick frames. Extends 1-1/4” Beyond the frame of the short edge of the solar panel. Designed to be used in conjunction with L-feet. Compatible with tilt bars. Made from corrosion-resistant stainless steel.
For tilting panels approximately 19-25” wide at roughly a 45-degree angle to increase output in the winter months. Made from corrosion-resistant stainless steel. Not recommended for the 90W Long panel.
This item includes 2pc T-Knobs for install. For Extra T-Knobs please see our listing here.
For tilting the ZS170 solar panel at a 45 degree angle for increased output in the winter months. Made from corrosion resistant stainless steel.
This item includes 2pc T-Knobs for install. For Extra T-Knobs please see our listing here.
Dicor protects the VHB tape from the elements. Use it to seal around mount feet, cable management hardware and combiner boxes attached to roofs.
Ideal for Airstream roofs, Teroson protects the VHB tape from the elements and is UV rated. Use it to seal around mount feet, cable management hardware, and combiner boxes attached to roofs. Do not use Teroson on TPO roofs.
AM Solar Part Number: MOUNTL-T3