LifeBlue LiFePO4 12V Drop-In Battery
LifeBlue LiFePO4 12V Drop-In Battery
LifeBlue lithium batteries have integrated controls to automatically protect against overcharging, overly discharging, and frozen charging. This integration makes installation much easier for DIY projects. LifeBlue offers the most comprehensive Bluetooth monitoring showing status, temperature, voltage, current, cycle life, battery health, Faults and state of charge.
All xxx-D models can be connected in series up to 48 Volts. The xxx-D-LT can only be parallel connected due to the way the internal heating system works. It is recommended that you not parallel more than four batteries, but some customers have gone against that recommendation and successfully paralleled as many as eight batteries.
Low Temp rated batteries have an internal heating mechanism designed to allow more effective charging in extreme environments. Current that would have been used to charge the batteries gets redirected to the heater until the battery is no longer frozen.
UL1973 Certificate of Compliance
UL 1642 Certificate of Compliance
Certifications: IEC62133; CE; TUV; TLC; UN38.3; IATF16949; ISO9001-2009; ISO14001; ISO45001; OHSAS18001; TS16949
Case is designed for serviceability, replace cells, BMS, other repairs
Dual CAN and RS485 Data ports, firmware updates, DATA out, battery control, other functions
Multi function Reset button with 4 LED display
Patented Bluetooth monitoring, free App for Android and IOS devices
Broad charge voltage range, from 13.6 to 15 Volts is acceptable
Does not require specialty Li battery charger
Works with any PV solar controller
Works with any Inverter-Charger
All models have low temperature charge protection
Capable of starting 15kW generator from single battery
96 FETS (200,300) on our power boards for high surge and continuous current capability
At any time in the future, additional capacity can be combined with older batteries
Dimensions:
100Ah: H 9.4" x W 12.5" x D 6.5" 28lbs
200Ah: H 10.8" x W 20" x D 6.9" 57lbs
300Ah: H 9.5" x W 20.25" x D 11" 83lbs
*Does not include terminals or cables
Current Information:
100Ah: Charge Current: 60A; Up to 80A @ <75° F
100Ah: Discharge Current 100A continuous, 300A for 3 seconds
200Ah: Charge Current: 120A; Up to 150A @ <75° F
200Ah: Discharge Current 150A continuous, 200A for 30 minutes
300Ah: Charge Current: 120A; Up to 150A @ <75° F
300Ah: Discharge Current 150A continuous, 200A for 30 minutes
Pre-Charging and Installation Guide
Warranty
You may also be interested in:
For helpful advice on the differences between Parallel & Series connection and which might be best for you and your project, please see our wiki article here.
Cable, Lugs, and Heat Shrink needed to connect two batteries in parallel or series, depending on kit choice. These kits are ideal for 12V batteries.
Victron Cyrix battery combiners connect your house battery bank to your starter battery and alternator to allow alternator charging. Additionally, when a charge is applied to a house battery bank the Cyrix will close and allow current to flow to the starter battery. Select an appropriate Cyrix based on your house battery type and alternator current rating.
Alternator 160A or less - 120A Cyrix
Alternator more than 160A - 230A Cyrix
This kit allows for manual disconnect of high current battery lines. Ideal for isolating battery banks by interrupting output circuits on your battery bank. For use when putting a system with DC charging input into medium-long term storage, or for O&M of the battery bank. This switch is typically used between a battery bank and a post or fuse that all the positive connections attach to.
We offer kits for systems with 2000VA or 3000VA inverters.
Please note, the 5000VA 12V inverters would need a more heavy-duty switch.
Specifications (2000VA/3000VA)
Continuous Rating: 350A/300A
Intermittent Rating: 600A (5 min)/500A
Maximum Voltage: 48Vdc/48Vdc
Dimensions: 3 7/8"H x 3 7/8"W x 3"D / 2 7/8"H x 2 7/8"W x 3 1/4"D
Enable alternator charging to a drop-in lithium battery bank. An optional boost feature lets your house batteries start your ignition when your starter battery is dead. Not for use with alternators rated less than 160A, Smart Alternators, or rigs with regenerative braking.
AM Solar Part Number: BATTLI-LB-100D, BATTLI-LB-100D-LT, BATTLI-LB-200D, BATTLI-LB-200D-LT, BATTLI-LB-300D, BATTLI-LB-300D-LT
All lithium battery purchases are final.